C5 Error Handling Commands, Statements and Funtions

Statement :

BEGIN SEQUENCE :

Define a sequence of statements for a BREAK

BEGIN SEQUENCE
    <statements>...
    [BREAK [<exp>]]
    <statements>...
    [RECOVER [USING <idVar>]]
    <statements>...
END [SEQUENCE]

Functions :

ALTD() :

Invoke the Clipper Debugger

ALTD( [ <nAction> ] ) --> NIL

BREAK() :

Branch out of a BEGIN SEQUENCE…END construct

BREAK( <exp> ) --> NIL

DOSERROR() :

Return the DOS error number

DOSERROR( [ <nNewOsCode> ] ) --> nOsCode

ERRORBLOCK() :

Post a code block to execute when a runtime error occurs

ERRORBLOCK( [ <bErrorHandler> ] ) --> bCurrentErrorHandler

ERRORLEVEL() :

Set the Clipper return code

ERRORLEVEL( [ <nNewReturnCode> ] ) --> nCurrentReturnCode

NETERR() :

Determine if a network command has failed

NETERR( [ <lNewError> ] ) --> lError

OUTERR() :

Write a list of values to the standard error device

OUTERR( <exp list> ) --> NIL

PROCLINE() :

Return the source line number of the current or previous activation

PROCLINE( [ <nActivation> ] ) --> nSourceLine

PROCNAME() :

Return the name of the current or previous procedure or user-defined function

PROCNAME( [ <nActivation> ] ) --> cProcedureName

Error Class :

Provides objects containing information about runtime errors.

Description :

An Error object is a simple object that contains information pertaining to a runtime error. Error objects have no methods, only exported instance variables. When a runtime error occurs, CA-Clipper creates a new Error object and passes it as an argument to the error handler block specified with the ERRORBLOCK() function. Within the error handler, the Error object can then be queried to determine the nature of the error condition.

Error objects can also be returned to the RECOVER statement of a BEGIN SEQUENCE construct with a BREAK statement. Here, the error object can be queried for local error handling. For more detailed information and examples refer to the Error Handling Strategies chapter in the Programming and Utilities guide.

Class Function :

ErrorNew() :

Returns a new Error object.

ErrorNew() --> objError

Exported Instance Variables :

args (Assignable) :

An array of function or operator arguments.

Contains an array of the arguments supplied to an operator or function when an argument error occurs. For other types of errors, Error:args contains a NIL value.

canDefault (Assignable) :

Indicates whether or not default recovery is available.

Contains a logical value indicating whether the subsystem can perform default error recovery for the error condition. A value of true (.T.) indicates that default recovery is available. Availability of default handling and the actual default recovery strategy depends on the subsystem and the error condition. The minimum action is simply to ignore the error condition.

Default recovery is requested by returning false (.F.) from the error block invoked to handle the error. Note that Error:canDefault is never true (.T.) if Error:canSubstitute is true (.T.).

canRetry (Assignable) :

Indicates whether or not a retry is possible after an error.

Contains a logical value indicating whether the subsystem can retry the operation that caused the error condition. A value of true (.T.) indicates that a retry is possible. Retry may or may not be available, depending on the subsystem and the error condition.

Retry is requested by returning true (.T.) from the error block invoked to handle the error. Note that Error:canRetry never contains true (.T.) if Error:canSubstitute contains true (.T.).

canSubstitute (Assignable) :

Indicates if a new result can be substituted after an error

Contains a logical value indicating whether a new result can be substituted for the operation that produced the error condition. Argument errors and certain other simple errors allow the error handler to substitute a new result value for the failed operation. A value of true (.T.) means that substitution is possible.

The substitution is performed by returning the new result value from the code block invoked to handle the error. Note that Error:canSubstitute is never true (.T.) if either Error:canDefault or Error:canRetry is true (.T.).

cargo (Assignable) :

User-definable variable.

Contains a value of any data type unused by the Error system. It is provided as a user-definable slot, allowing arbitrary information to be attached to an Error object and retrieved later.

description (Assignable) :

Character description of the error condition.

Contains a character string that describes the error condition. A zero-length string indicates that the subsystem does not provide a printable description for the error. If Error:genCode is not zero, a printable description is always available.

filename (Assignable) :

Name of the file associated with the error

Contains a character value representing the name originally used to open the file associated with the error condition. A zero-length string indicates either that the error condition is not associated with a particular file or that the subsystem does not retain filename information.

genCode (Assignable) :

Error code number.

Contains an integer numeric value representing a CA-Clipper generic error code. Generic error codes allow default handling of similar errors from different subsystems. A value of zero indicates that the error condition is specific to the subsystem and does not correspond to any of the generic error codes. The header file, Error.ch, provides a set of manifest constants for generic error codes.

operation (Assignable) :

Character description of the failed operation.

Contains a character string that describes the operation being attempted when the error occurred. For operators and functions, Error:operation contains the name of the operator or function. For undefined variables or functions, it contains the name of the variable or function. A zero-length string indicates that the subsystem does not provide a printable description of the operation.

osCode (Assignable) :

Operating system error code number

Contains an integer numeric value representing the operating system error code associated with the error condition. A value of zero indicates that the error condition was not caused by an error from the operating system. When Error:osCode is set to a value other than zero DOSERROR() is updated with the same value.

Error:osCode properly reflects the DOS extended error code for file errors. This allows proper distinction between errors which result from sharing violations (e.g., opening EXCLUSIVE when another process has already opened the file) and access violations (e.g., opening read/write when the file is marked read-only).

For a list of DOS error codes please look at here 

severity (Assignable) :

Indicates error severity

Contains a numeric value indicating the severity of the error condition. Four standard values are defined in Error.ch:

Error:severity Values
------------------------------------------------------------
Error.ch        Meaning
------------------------------------------------------------
ES_WHOCARES     The condition does not represent a failure;
                the error is informational.
ES_WARNING      The condition does not prevent further
                operations, but may result in a more serious 
                error later. 
ES_ERROR        The condition prevents further operations without 
                corrective action of some kind. 
ES_CATASTROPHIC The condition requires immediate termination 
                of the application.
------------------------------------------------------------

Note that the Clipper runtime support code only generates errors with severities of ES_WARNING or ES_ERROR

subCode (Assignable) :

Subsystem-specific error code number.

Contains an integer numeric value representing a subsystem-specific error code. A value of zero indicates that the subsystem does not assign any particular number to the error condition.

subSystem (Assignable) :

Character description of the subsystem generating the error.

Contains a character string representing the name of the subsystem generating the error. For errors with basic CA-Clipper operators and functions, the subsystem name “BASE” is given. For errors generated by a database driver, Error:subSystem contains the name of the database driver

tries (Assignable) :

Number of times the failed operation has been attempted.

Contains an integer numeric value representing the number of times the failed operation has been attempted. When Error:canRetry is true (.T.), Error:tries can be used to limit the number of retry attempts. A value of zero indicates that the subsystem does not track the number of times the operation has been tried.

Examples :

. This example demonstrates how a file open operation might be handled in an error handler replicating the default CA-Clipper behavior. When, for example, an attempt to open a database file with a USE command fails, control returns to the statement following the offending command:

#include "Error.ch"
#command RETRY => RETURN (.T.) // Retry operation
#command RESUME => RETURN (.F.) // Default recovery
//
FUNCTION MyError( objError )
   //
   // Handle file open error
   IF objError:genCode == EG_OPEN .AND.;
      objError:canDefault .AND.;
      NETERR()
   //
      RESUME
   ENDIF
  .
  . <other error statements>
  .
RETURN NIL

. This example retries an operation within an error handler a specified number of times:

 #include "Error.ch"
 #command RETRY => RETURN (.T.) // Retry operation
 #command RESUME => RETURN (.F.) // Default recovery
 //
FUNCTION MyError( objError )

 // Handle printer not ready error
 IF objError:genCode == EG_PRINT .AND.;
    objError:canRetry .AND.;
    objError:tries < 25

    RETRY
 ENDIF
 .
 . <other error statements>
 .
 RETURN NIL

. This code fragment returns an error object from an error handler to the RECOVER statement for further processing:

LOCAL objLocal, bLastHandler
// Save current and set new error handler
bLastHandler := ERRORBLOCK({ |objErr| ;
MyHandler(objErr, .T.)})
BEGIN SEQUENCE
   .
   . <operation that might fail>
   .
   RECOVER USING objLocal
   .
   . <send messages to objLocal and handle the error>
   .
END
// Restore previous error handler
ERRORBLOCK( bLastHandler )
FUNCTION MyHandler( objError, lLocalHandler )

    // Handle locally returning the error object
    IF lLocalHandler
       BREAK objError
    ENDIF
    .
    . <other statements to handle the error>
    .
RETURN NIL

Files: Header file is Error.ch, default error handler is in Errorsys.prg.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s