COMMIT

COMMIT

Perform a solid-disk write for all active work areas

Syntax

      COMMIT

Description

COMMIT is a database command that flushes Harbour buffers and performs a solid-disk write for all work areas with open database and index files. The solid-disk write capability is available under DOS version 3.3 and above. Under DOS 3.2 or less, COMMIT flushes Harbour buffers to DOS.

In a network environment, issuing a GO TO RECNO() or a SKIP0 will flush Clipper’s database and index buffers, but only a COMMIT will flush the buffers and perform a solid-disk write. Thus to insure updates are visible to other processes, you must issue a COMMIT after all database update commands (e.g., APPEND, REPLACE). To insure data integrity, COMMIT should be issued before an UNLOCK operation. Refer to the “Network Programming” chapter for more information on update visibility.

Examples

      .  In this example, COMMIT forces a write to disk after a series
        of memory variables are assigned to field variables:
      USE Sales EXCLUSIVE NEW
      MEMVAR->Name := Sales->Name
      MEMVAR->Amount := Sales->Amount
      //
      @ 10, 10 GET MEMVAR->Name
      @ 11, 10 GET MEMVAR->Amount
      READ
      //
      IF UPDATED()
         APPEND BLANK
         REPLACE Sales->Name WITH MEMVAR->Name
         REPLACE Sales->Amount WITH MEMVAR->Amount
         COMMIT
       ENDIF

Seealso

DBCOMMIT(), DBCOMMITALL(), GO, SKIP

Advertisements

Harbour All Functions – D

Date()
Day()
Days()

DaysInMonth()
DaysToMonth()

dbAppend()
dbClearFilter()
dbCloseAll()
dbCloseArea()
dbCommit()
dbCommitAll()
dbCreate()
dbDelete()
dbEval()
dbF()
dbFilter()
dbGoBottom()
dbGoTo()
dbGoTop()
dbReCall()
dbRLock()
dbRLockList()
dbRUnlock()
dbSeek()
dbSelectArea()
dbSetDriver()
dbSetFilter()
dbSkip()
dbSkipper()
dbStruct()
dbUnlock()
dbUnlockAll()
dbUseArea()

DecToBin()
DecToHexa()
DecToOctal()

Deleted()
Descend()
DevOutPict()
DirChange()
DirRemove()
DiskSpace()

DMY()
Do()
DoW()

DOY
DToC()

DToR
DToS()

Harbour Database Functions

Database Functions

AFields Fills referenced arrays with database field information
Alias Returns the alias name of a work area
BOF Test for the beggining-of-file condition
dbAppend Appends a new record to a database file
dbClearFilter Clears the current filter condiction in a work area
dbCloseAll Close all open files in all work areas.
dbCloseArea Close a database file in a work area
dbCommit Updates all index and database buffers for a given workarea
dbCommitAll Flushes the memory buffer and performs a hard-disk write
dbCreate Creates an empty database from a array
dbDelete Mark a record for deletion in a database
dbEval Performs a code block operation on the current Database
DBF Alias name of a work area
dbFilter Return the filter expression in a work area
dbGoBottom Moves the record pointer to the bottom of the database
dbGoto Position the record pointer to a specific location
dbGoTop Moves the record pointer to the top of the database
dbRecall Recalls a record previousy marked for deletion
dbSeek Searches for a value based on an active index
dbSelectArea Change to another work area
dbSetDriver Establishes the RDD name for the selected work area
dbSetFilter Establishes a filter condition for a work area
dbSkip Moves the record pointer in the selected work area
dbSkipper Helper function to skip a database
dbStruct Builds a multidimensional array of a database structure
dbUseArea Opens a work area and uses a database file
Deleted Tests the record’s deletion flag
EOF Test for end-of-file condition
FCount Counts the number of fields in an active database
FieldDeci Determines the number of decimal places of a given numeric field
FieldGet Obtains the value of a specified field
FieldName Return the name of a field at a numeric field location
FieldPos Return the ordinal position of a field
FieldPut Set the value of a field variable
FieldSize Determines the size of a given field
FieldType Determines the type of a given field
Found Determine the success of a previous search operation
Header Return the length of a database file header
LastRec Returns the number of records in an active work area or database
LUpdate Yields the date the database was last updated
RecCount Counts the number of records in a database
RecNo Returns the current record number or identity
RecSize Returns the size of a single record in an active database
Select Returns the work area number for a specified alias
Used Checks whether a database is in use in a work area

dbCommitAll()

DBCOMMITALL()

Flushes the memory buffer and performs a hard-disk write

Syntax

      DBCOMMIT()

Description

This function performs a hard-disk write for all work areas. Before the disk write is performed, all buffers are flushed. open work areas.

Examples

      PROCEDURE Main()
         LOCAL cName := SPACE( 40 )
         LOCAL nId := 0
         USE test EXCLUSIVE NEW
         USE testid NEW INDEX testid
         //
         @ 10, 10 GET cName
         @ 11, 10 GET nId
         READ
         //
         IF UPDATED()
            APPEND BLANK
            REPLACE tests->Name WITH cName
            REPLACE tests->Id WITH nId
            IF ! testid->( DBSEEK( nId ) )
               APPEND BLANK
               REPLACE tests->Id WITH nId
            ENDIF
         ENDIF
         DBCOMMITALL()
         RETURN

Compliance

Clipper

Files

Library is rdd

Seealso

DBCLOSEALL(), DBCOMMIT(), DBUNLOCK()

C5_DBCOMMIT

 DBCOMMIT()
 Flush pending updates
------------------------------------------------------------------------------
 Syntax

     DBCOMMIT() --> NIL

 Returns

     DBCOMMIT() always returns NIL.

 Description

     DBCOMMIT() causes all updates to the current work area to be written to
     disk.  All updated database and index buffers are written to DOS and a
     DOS COMMIT request is issued for the database (.dbf) file and any index
     files associated with the work area.

     DBCOMMIT() performs the same function as the standard COMMIT command
     except that it operates only on the current work area.  For more
     information, refer to the COMMIT command.

 Notes

     .  Network environment: DBCOMMIT() makes database updates visible
        to other processes.  To insure data integrity, issue DBCOMMIT()
        before an UNLOCK operation.  For more information, refer to the
        "Network Programming" chapter in the Programming and Utilities Guide.

     .  DBCOMMIT() uses DOS interrupt 21h function 68h to perform the
        solid-disk write.  It is up to the network operating system to
        properly implement this request.  Check with the network vendor to
        see if this is supported.

 Examples

     .  In this example, COMMIT is used to force a write to disk after
        a series of memory variables are assigned to field variables:

        USE Sales EXCLUSIVE NEW
        MEMVAR->Name := Sales->Name

        MEMVAR->Amount := Sales->Amount
        //
        @ 10, 10 GET MEMVAR->Name
        @ 11, 10 GET MEMVAR->Amount
        READ
        //
        IF UPDATED()
           APPEND BLANK
           REPLACE Sales->Name WITH MEMVAR->Name
           REPLACE Sales->Amount WITH MEMVAR->Amount
           Sales->( DBCOMMIT() )
        ENDIF

 Files   Library is CLIPPER.LIB.

See Also: CLOSE COMMIT DBCLOSEALL() DBCOMMITALL() DBUNLOCK()



C5 Database Functions

AFIELDS() :

Fill arrays with the structure of the current database file

AFIELDS([<aFieldNames>],
    [<aTypes>],
    [<aWidths>],
    [<aDecimals>]) --> nFields

ALIAS() : 

Return a specified work area alias

ALIAS([<nWorkArea>]) --> cAlias

BOF() : 

Determine when beginning of file is encountered

BOF() --> lBoundary

DBAPPEND() : 

Add a new record

DBAPPEND() --> NIL

DBCLEARFILTER() : 

Clear a filter condition

    DBCLEARFILTER() –> NIL

DBCLEARIND() :  Close all indexes for the current work area

    DBCLEARINDEX() --> NIL

DBCLEARREL() : 

Clear active relations

DBCLEARRELATION() --> NIL

DBCLOSEALL() : 

Close all occupied workareas

DBCLOSEALL() --> NIL

DBCLOSEAREA() : 

Close a workarea

DBCLOSEAREA() --> NIL

DBCOMMIT() : 

Flush pending updates

DBCOMMIT() --> NIL

DBCOMMITALL() : 

Flush pending updates in all workareas

DBCOMMITALL() --> NIL

DBCREATE() : 

Create a database file from a database structure array

DBCREATE(<cDatabase>, <aStruct> [, <cDriver> ] ) --> NIL

DBCREATEIND() : 

Create an Index

   DBCREATEINDEX(<cIndexName>, <cKeyExpr>,
        [<bKeyExpr>], [<lUnique>]) --> NIL

DBDELETE() : 

Mark a record for deletion

DBDELETE() --> NIL

DBEDIT() : 

        Browse records in a table layout

    DBEDIT([<nTop>], [<nLeft>],
        [<nBottom>], <nRight>],
        [<acColumns>],
        [<cUserFunction>],
        [<acColumnSayPictures> | <cColumnSayPicture>],
        [<acColumnHeaders> | <cColumnHeader>],
        [<acHeadingSeparators> | <cHeadingSeparator>],
        [<acColumnSeparators> | <cColumnSeparator>],
        [<acFootingSeparators> | <cFootingSeparator>],
        [<acColumnFootings> | <cColumnFooting>]) --> NIL

DBEVAL() : 

Evaluate a code block for each record

DBEVAL(<bBlock>,
    [<bForCondition>],
    [<bWhileCondition>],
    [<nNextRecords>],
    [<nRecord>],
    [<lRest>]) --> NIL

DBF()* : 

Return current alias name

DBF() --> cAlias

DBFIELDINFO() : 

Return and optionally change information about a field

   DBFIELDINFO(<nInfoType>,

        <nFieldPos>,
        [<expNewSetting>]) --> uCurrentSetting

DBFILEGET() : 

Insert the contents of a field into a file

     DBFILEGET(<nFieldPos>, <cTargetFile>, <nMode>)
        --> lSuccess

DBFILEPUT() : 

Insert the contents of a file into a field

     DBFILEPUT(<nFieldPos>, <cSourceFile>)
        --> lSuccess

 DBFILTER() : 

Return the current filter expression as a character string

DBFILTER() --> cFilter

DBGOBOTTOM() : 

Move to the last logical record

DBGOBOTTOM() --> NIL

DBGOTO() : 

Move to a particular record

DBGOTO(<nRecordNumber>) --> NIL

DBGOTOP() : 

Move to the first logical record

DBGOTOP() --> NIL

DBINFO() : 

         Return and optionally change database file information

    DBINFO(<nInfoType>, [<expNewSetting>])
        --> uCurrentSetting

DBORDERINFO() :          Return and optionally change information about orders and index files

    DBORDERINFO(<nInfoType>,   [<cIndexFile>],
        [<cOrder> | <nPosition>],
        [<expNewSetting>]) --> uCurrentSetting

DBRECALL() : 

Reinstate a record marked for deletion

DBRECALL() --> NIL

DBRECORDINFO() :

         Return and optionally change information about a record

    DBRECORDINFO(<nInfoType>,
        [<nRecord>],
        [<expNewSetting>]) --> uCurrentSetting

DBREINDEX() :

         Recreate all active indexes for the current work area

    DBREINDEX() --> NIL

DBRELATION() :

Return the linking expression of a specified relation

DBRELATION( <nRelation> ) --> cLinkExp

DBRLOCK() :      

         Lock the record at the current or specified identity

    DBRLOCK([<xIdentity>]) --> lSuccess

DBRLOCKLIST()          Return an array of the current lock list

   DBRLOCKLIST() --> aRecordLocks

DBRSELECT() :

Return the target workarea number of a relation

DBRSELECT( <nRelation> ) --> nWorkArea

DBRUNLOCK()    

          Release all or specified record locks

    DBRUNLOCK([<xIdentity>]) --> NIL

DBSEEK() : 

Search for a key value

DBSEEK(<expKey>, [<lSoftSeek>]) --> lFound

DBSELECTAR() : 

Change the current workarea

DBSELECTAREA(<nArea> | <cAlias>) --> NIL

DBSETDRIVER() : 

Set the default database driver

DBSETDRIVER([<cDriver>]) --> cCurrentDriver

DBSETFILTER() : 

Set a filter condition

DBSETFILTER(<bCondition>, [<cCondition>]) --> NIL

DBSETINDEX()    

         Empty orders from an order bag into the order list

    DBSETINDEX(<cOrderBagName>) --> NIL

DBSETORDER()

Set the controlling order

    DBSETORDER(<nOrderNum>) --> NIL

DBSETRELAT() :

Relate two workareas

DBSETRELATION( <nArea> | <cAlias>, <bExpr>, [<cExpr>]) --> NIL

DBSKIP() : 

Move relative to the current record

DBSKIP([<nRecords>]) --> NIL

DBSTRUCT() : 

Create an array containing the structure of a database file

DBSTRUCT() --> aStruct

DBUNLOCK()

Release all locks for the current work area

    DBUNLOCK() --> NIL

DBUNLOCKALL()

Release all locks for all work areas

    DBUNLOCKALL() --> NIL

DBUSEAREA() : 

Use a database file in a workarea

DBUSEAREA( [<lNewArea>],
    [<cDriver>],
    <cName>,
    [<xcAlias>],
    [<lShared>],
    [<lReadonly>]) --> NIL

DELETED() : 

Return the deleted status of the current record

DELETED() --> lDeleted

EOF() : 

Determine when end of file is encountered

EOF() --> lBoundary

FCOUNT() : 

Return the number of fields in the current (.dbf) file

FCOUNT() --> nFields

FIELD() : 

Return a field name from the current (.dbf) file

    FIELD/FIELD(<nPosition>) --> cFieldName

FIELDBLOCK() :

Return a set-get code block for a field variable

FIELDBLOCK(<cFieldName>) --> bFieldBlock

FIELDGET() : 

Retrieve the value of a field using the ordinal position of the field in the database structure

FIELDGET(<nField>) --> ValueField

FIELDNAME() : 

Return a field name from the current (.dbf) file

FIELDNAME/FIELD(<nPosition>) --> cFieldName

FIELDPOS() : 

Return the position of a field in a workarea

FIELDPOS(<cFieldName>) --> nFieldPos

FIELDPUT() : 

Set the value of a field variable using the ordinal position of the field in the database structure

FIELDPUT(<nField>, <expAssign>) --> ValueAssigned

FIELDWBLOCK() : 

Return a set-get block for a field in a given workarea

FIELDWBLOCK(<cFieldName>, <nWorkArea>) --> bFieldWBlock

FLOCK() : 

Lock an open and shared database file

    FLOCK() –> lSuccess

FOUND() : 

Determine if the previous search operation succeeded

FOUND() --> lSuccess

HEADER() : 

Return the current database file header length

HEADER() --> nBytes

LASTREC() : 

Determine the number of records in the current (.dbf) file

LASTREC() | RECCOUNT()* --> nRecords

LUPDATE() : 

Return the last modification date of a (.dbf) file

LUPDATE() --> dModification

RECCOUNT()* : 

Determine the number of records in the current (.dbf) file

RECCOUNT()* | LASTREC() --> nRecords

RECNO() : 

Return the current record number of a work area

RECNO() --> nRecord

RECSIZE() : 

Determine the record length of a database (.dbf) file

RECSIZE() --> nBytes

RLOCK()

Lock the current record in the active work area

    RLOCK() --> lSuccess

SELECT() : 

Determine the work area number of a specified alias

SELECT([<cAlias>]) --> nWorkArea

USED() : 

Determine if a database file is in USE

USED() --> lDbfOpen